
Front receiver
Built into the frame
The 2 in receiver sits under the front platform. Push trailers with it, and mount the winch kit on the plate just below.
More power, more range, a smoother drive.
From $3,450 + $250 flat‑rate delivery, liftgate included
Pro 60V electric micro-truck
+ $250 flat‑rate delivery, liftgate included
Finish color: Matte BlackSorted by ship date
Earlier orders · sold out
Battery
Tires
Ships November 18–25, 2026
Ship dates are estimates. Transit to our California headquarters can shift, and orders ship in the order they were placed. If your date changes, we’ll contact you with the new one.





Charged at checkout. Cancel any time before it ships for a full refund.
Questions? Call or text (707) 329-4442
What it’s for
Holds itself on a hill and controls your speed on the way down: hill-hold, and controlled descent with the speed switch in Low. It’s set at the factory and sealed. No app, no wifi, no updates, nothing to maintain.
An integrated 2-inch front receiver takes a standard ball mount, and the rear step is pre-drilled for the StepRanger Rear Step Hitch, no drilling.
A MOLLE-compatible panel takes off-the-shelf gear, and the battery box carries a USB-C and USB-A outlet. Powder-coat finish in five colors.
Towing and trailers
Put a ball mount in the front receiver and you can face the trailer while you push it into a garage, a barn or a tight spot. The rear step takes a hitch for pulling.
We move 18 ft enclosed trailers around our California and Montana locations this way.
Tongue weight is the weight the trailer puts on the hitch, and it is what to watch when you tow. We recommend about 250 lb. If the tongue is heavier, move cargo back toward the trailer’s axles.

Front receiver
The 2 in receiver sits under the front platform. Push trailers with it, and mount the winch kit on the plate just below.
Rear Step Hitch
Bolts to the holes already in the rear step, no drilling. Takes a pin hitch or a ball mount.
$30
See the Rear Step Hitch
60V Winch Kit
Runs on the truck’s own 60V system and bolts to the plate below the front receiver. No drilling. You install it yourself.
$300
See the winch kitCreator review
Tony’s Cool Tools · 22:38 · September 2026
Tony’s Cool Tools was provided a unit for review.
More videosSize and fit
Drawn to scale from the production CAD model. Tap any measurement to see what it means.
Tap any measurement to see what it means.
| Front receiver | Integrated 2 in. The opening is 16 in off the ground at the bottom and 18 in at the top. |
|---|---|
| Rear step | Pre-drilled for the StepRanger Rear Step Hitch. It bolts on, no drilling. |
| Overall length, step folded | 67.5 in |
|---|---|
| Overall length, step down | 74.2 in |
| Overall width, at the bed | 31.5 in |
| Widest point, at the latch handles | 34.4 in |
| Overall height, to the grips | 50.4 in |
| Wheelbase, axle to axle | 46.7 in |
| Outside of the tires, left to right | 30.6 in |
| Between the tires, at the ground | 22.6 in |
| Bed floor, inside the rails | 59.2 × 29.9 in |
| Bed floor height, from the ground | 19.5 in |
| Side rail height, above the bed floor | 13.9 in |
| Operator step height, step down | 12.5 in |
| Handlebar width, grip end to grip end | 23 in |
| Ground clearance, between the axles | 8.9 in |
| Clearance under the front axle, center | 5.8 in |
| Clearance under the rear axle, center | 4.5 in |
Measured from the production CAD model with stock 16 × 4 in tires, unloaded. We recommend at least 35 in of clearance for any opening on stock tires.
Specifications
| Length × width | 67.5 × 31.5 in1 |
|---|---|
| Cargo bed | 59.2 × 29.9 in inside the rails |
| Height | 50.4 in to the handlebar grips |
| Recommended clearance | Allow 35 in |
| Weight | 417 lb single battery · 488 lb dual |
| Turning radius | ~8 ft |
| Ground clearance | 8.9 in between the axles2 |
| Motor | 1,200 W brushless |
|---|---|
| Drive | Rear-wheel |
| Top speed | ~15 mph |
| Slowest setting | ~5 mph |
| Climbing | Up to 30° (~58%) |
| Brakes | Hydraulic disc |
| System | 60 V Sealed lead-acid (AGM/GEL), five 12 V batteries in series |
|---|---|
| Range, single | 16 mi3 |
| Range, dual | ~29 mi |
| Charging | 110 V outlet, charged overnight |
| Charger | 60 V / 3.6 A |
| Arrives | 80–100% charged |
| Payload | 1,200 lb |
|---|---|
| Tires | 16 × 4 in, 4 × 4 bolt pattern |
| Warranty | 2 years |
Owners and press

“Has been a game changer for clean up and running tools not only for our property but our neighbors.”

“I ran it through the paces moving almost 1,000 pounds of pay dirt at a gold mine. It worked as advertised. It had no problem climbing 8% grade in low gear.”

“Our property has plenty of steep areas and hauling brush cuttings has been enjoyable with the StepRanger. Plenty of power, range and quality all in one machine.”

“We’ve also been impressed with the company’s customer support—they’re quick to respond and genuinely helpful.”
GearJunkie · 9.3/10
“I don't know that I've ever tested one I've liked more.”
GearJunkie tested a unit we provided.
Read the review on GearJunkieAfter you order
Lower 48 delivery is a flat $250. Canada, Alaska and Hawaii are quoted. Free pickup in Missoula or Sebastopol.
For flat ground and lighter loads, the All-Terrain does the job for less.
See the All-Terrain4.92 out of 5 · 59 reviews
Call or text with any question before you order.



